What you need:
•Chair :)
•Durable fabric
•Paint & brush (or stain & staining supplies)
•Stapler
•Screwdriver
•Pliers
I found a chair at Salvation Army. It looked pretty rough, but luckily this store didn't see it's potential and it was only $2.99. Score!
Start by removing the seat by unscrewing the screws underneath.
For a small chair like this, you should only need 1-1.5 yd of fabric. I always buy more than I need just in case I mess something up. My favorite type of fabric for reupholstering chairs is printed duck.
The fabric on this chair is Waverly brand from Joann Fabrics, normally $19.99/yd but was half off...so I paid about $7 for 1.75 yd). It's softer than canvas but still very durable.
You can remove the old fabric or just put your new fabric directly over it. I always remove fabric with used furniture. I've reupholstered over existing fabric with items that were already mine.
To remove the fabric, use a flat head screwdriver and/or pliers to pull out staples (or upholstery tacks). Sometimes you have to use the screwdriver to lift a staple before you can pull it out with the pliers.
To apply your new fabric, all you have to do is put your fabric over the cushion then flip upside down and staple! Make sure you are keeping your fabric tight while stapling. If you make a mistake, just remove the last staple or two, adjust fabric, and restaple.
Corners can be tricky, there are many ways to do them so just play with it until you find a look you like. On an old chair like mine, you may want to add a little more to cushion. I used some cushion foam I already had from Walmart and cut it to fit on top of the cushion.
If you are painting or staining the frame of your chair, do this while the cushion is off. I used Annie Sloan Chalk paint in Old White that I already had at home.
Once your chair frame is dry, screw the seat back on and you're done!
